E1
Temperature Sensor Error
- Turn OFF and unplug the unit.
- Let it cool for 10–15 minutes.
- Check sensor connection inside heating chamber.
- Replace temperature sensor if faulty.
E2
Unit Overheating
- Stop operation immediately.
- Ensure proper ventilation around unit.
- Clean air vents and fan area.
- Allow cooling before restarting.
E3
Heating Element Malfunction
- Inspect heating coil for damage.
- Check electrical continuity.
- Reset power supply.
- Replace heating element if needed.
E4
Internal Circuit Issue
- Turn OFF power immediately.
- Inspect wiring inside control board area.
- Look for burnt components.
- Replace control board if required.
E5
Fan Motor Error
- Check fan blade obstruction.
- Clean dust buildup.
- Test fan motor operation.
- Replace motor if faulty.
E6
Power Supply Problem
- Check wall outlet voltage.
- Try different power socket.
- Inspect power cord damage.
- Replace power supply board if needed.
E7
Control Board Communication Error
- Reset the unit by unplugging for 10 minutes.
- Inspect wiring between PCB components.
- Check for moisture damage.
- Replace control board if necessary.
E8
Sensor Calibration Failure
- Reset device to factory settings.
- Clean internal sensors.
- Check wiring connections.
- Replace sensor if calibration fails.
E9
Power Fluctuation Detected
- Use stable power source.
- Avoid extension cords.
- Check household voltage stability.
- Restart device after stabilization.
E10
Internal Overheating Warning
- Stop cooking immediately.
- Allow unit to cool completely.
- Clean vents and airflow channels.
- Do not overload cooking basket.
E11
Airflow Blockage Detected
- Check air intake and exhaust vents.
- Remove grease or dust buildup.
- Ensure proper spacing around unit.
- Restart after cleaning.
E12
Control Board Reset Required
- Unplug unit for 10–15 minutes.
- Press reset (if available).
- Check firmware or internal settings.
- Replace PCB if issue persists.
SHUT OFF
Overheat Protection Activated
- Turn OFF and unplug immediately.
- Let unit cool for at least 30 minutes.
- Clean vents and internal fan area.
- Do not restart until fully cooled.